OIL SEALS

Rubber Components like Oil Seals, O Rings, Gaskets, Bushes, Rubber to Metal Bonded Parts, Packaging Sets, Cloth Seals, etc are constantly developed and supplied as per consumer requirements.

Oil seals are used to keep chemicals apart from lubricants such as oil/fat or water away to keep spinning shafts or bearings in proper working condition. Rotary shaft Seals are among the most commonly used seals for sealing lubricating oil, water or grease in different applications.

THE USES OF OIL SEALS

Oil seals are used for essential applications in the oil, gas and petrochemical sectors. They are created to avoid leaks from the sealing lip and rotary shaft by forming a thin layer of oil between them. Oil seals could be developed using well-known sealing materials, involving NBR, EPDM, PolyTetraFluoroEthylene (PTFE), Silicone,and fluoroelastomer.

They are generally utilised for the following purposes:

• Submerged water pumps & generators
• Gearbox & Motors
• Transmission of electricity
• Electrical turbines
• Fans
• Industrial Pump
• Compressors
• Refineries of crude
• Off-highway Jobs

Rotary Wheel Of Auto Parts

WHAT ARE THE TYPES OF OIL SEALS?

TYPE	TYPE	DESCRIPTION
	S	Rubber on outer diameter with a carbon steel insert & stainles steel spring.
	SG	Ribbed outer rubber surface,with this system the thermal expansion of the housing is absorbed,This is used in automotive application
	ST	Oil seal with additional dust lip to prevent damage of sealing lip and to avoid the ingress of dust,dirt,water etc Into the system.
	SGT	Identical application as type ST, but the outside rubber surface has a ribbed design to absorb thermal expansion of the housing.
	S-DUO	S type with two sealing lips, used for sealing two seperate media. When the requested S-DUO type is not available, two S-types can be filled back to back
	SM	Metal cased standard oil seal with vulcanised sealing lips. This type is frequently replaced by type S.
	SMT	Similar to the SM but with additional dust lip. Application are the same as type SGT , when the requested type is not available.

WHY SHOULD YOU CHOOSE ?

• Frictionless lip design
• Extremely easy assembly
• Non-corrosive spring
• Energy savings
• Knife-edge friction for optimal sealing
• Gentle in design & hard to seal
• Will not cut off the shaft or the spacer
• Strong output against sand, dirt and other substances